🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

EWS Heater Guard 1.5″ – Sediment & Scale Protection for Larger Water Heaters

Product image 1

EWS Heater Guard 1.5″ – Sediment & Scale Protection for Larger Water Heaters

EWS Heater Guard 1.5″ – Sediment & Scale Protection for Water Heaters

The EWS Heater Guard 1.5″ is a rugged inline protection unit designed for homes with larger plumbing (1½″ lines). It combines a 5-micron pre-sediment filter and food-grade polyphosphate media to trap sediment and inhibit mineral scale from damaging your water heater, plumbing, and fixtures.

Features & Benefits

  • Dual Action Protection — 5 µm pre-sediment filter removes rust, sand, silt, and suspended solids before they reach your heater.
  • Scale Control — polyphosphate media helps reduce scale buildup on heating elements and internal surfaces, extending life expectancy.
  • Reversible Flow — installs in either direction, offering flexibility in plumbing set-ups during retrofits or system upgrades.
  • Fully Assembled — arrives preloaded and ready to mount, reducing installation effort and downtime.
  • High Flow Capacity — supports larger household demand due to the 1½″ design.
  • Built to Last — constructed with food-grade materials and designed to meet compliance standards.

Technical Specifications

Model # EWS-HEATER-GUARD-1.5
Height Approximately 31″ (compact design, dependent on media load)
Diameter ~6″
Weight (Dry) ~12 lbs
Flow Rating Up to ~20 GPM (suitable for 1½″ lines)
Filtration Media 5 µm pre-sediment + food-grade polyphosphate
Replacement Media BB-GUARD-FILTER-1.5 (20″, 5 µm pre-filter)
Service Life Replace annually or as needed (do not exceed 1 year)
Operating Pressure Max 75 psi; typical range 30–75 psi
Temperature Range 40 °F to 100 °F (4 °C to 38 °C)

*Performance varies depending on water quality and usage conditions.

Installation & Use Notes

  • Recommended for installation on the cold-water inlet of your water heater—the unit should be upstream of the heater.
  • For well water, additional pre-treatment may be needed—test water quality before installing.
  • Do **not** use with softened water supplies containing sodium or potassium chlorides; such salt may impact media effectiveness.
  • Install in cold-water line only, and observe direction if marked; reversible for compatibility.
  • Replace the filter annually (or sooner in heavy sediment conditions) to maintain performance.

What’s Included

  • Heater Guard 1.5″ unit with pre-loaded media
  • Mounting bracket & hardware
  • Manual and filter replacement instructions

EWS Heater Guard 1.5″ – Sediment & Scale Protection for Water Heaters

The EWS Heater Guard 1.5″ is a rugged inline protection unit designed for homes with larger plumbing (1½″ lines). It combines a 5-micron pre-sediment filter and food-grade polyphosphate media to trap sediment and inhibit mineral scale from damaging your water heater, plumbing, and fixtures.

Features & Benefits

  • Dual Action Protection — 5 µm pre-sediment filter removes rust, sand, silt, and suspended solids before they reach your heater.
  • Scale Control — polyphosphate media helps reduce scale buildup on heating elements and internal surfaces, extending life expectancy.
  • Reversible Flow — installs in either direction, offering flexibility in plumbing set-ups during retrofits or system upgrades.
  • Fully Assembled — arrives preloaded and ready to mount, reducing installation effort and downtime.
  • High Flow Capacity — supports larger household demand due to the 1½″ design.
  • Built to Last — constructed with food-grade materials and designed to meet compliance standards.

Technical Specifications

Model # EWS-HEATER-GUARD-1.5
Height Approximately 31″ (compact design, dependent on media load)
Diameter ~6″
Weight (Dry) ~12 lbs
Flow Rating Up to ~20 GPM (suitable for 1½″ lines)
Filtration Media 5 µm pre-sediment + food-grade polyphosphate
Replacement Media BB-GUARD-FILTER-1.5 (20″, 5 µm pre-filter)
Service Life Replace annually or as needed (do not exceed 1 year)
Operating Pressure Max 75 psi; typical range 30–75 psi
Temperature Range 40 °F to 100 °F (4 °C to 38 °C)

*Performance varies depending on water quality and usage conditions.

Installation & Use Notes

  • Recommended for installation on the cold-water inlet of your water heater—the unit should be upstream of the heater.
  • For well water, additional pre-treatment may be needed—test water quality before installing.
  • Do **not** use with softened water supplies containing sodium or potassium chlorides; such salt may impact media effectiveness.
  • Install in cold-water line only, and observe direction if marked; reversible for compatibility.
  • Replace the filter annually (or sooner in heavy sediment conditions) to maintain performance.

What’s Included

  • Heater Guard 1.5″ unit with pre-loaded media
  • Mounting bracket & hardware
  • Manual and filter replacement instructions
$148.31

Original: $423.75

-65%
EWS Heater Guard 1.5″ – Sediment & Scale Protection for Larger Water Heaters—

$423.75

$148.31

Description

EWS Heater Guard 1.5″ – Sediment & Scale Protection for Water Heaters

The EWS Heater Guard 1.5″ is a rugged inline protection unit designed for homes with larger plumbing (1½″ lines). It combines a 5-micron pre-sediment filter and food-grade polyphosphate media to trap sediment and inhibit mineral scale from damaging your water heater, plumbing, and fixtures.

Features & Benefits

  • Dual Action Protection — 5 µm pre-sediment filter removes rust, sand, silt, and suspended solids before they reach your heater.
  • Scale Control — polyphosphate media helps reduce scale buildup on heating elements and internal surfaces, extending life expectancy.
  • Reversible Flow — installs in either direction, offering flexibility in plumbing set-ups during retrofits or system upgrades.
  • Fully Assembled — arrives preloaded and ready to mount, reducing installation effort and downtime.
  • High Flow Capacity — supports larger household demand due to the 1½″ design.
  • Built to Last — constructed with food-grade materials and designed to meet compliance standards.

Technical Specifications

Model # EWS-HEATER-GUARD-1.5
Height Approximately 31″ (compact design, dependent on media load)
Diameter ~6″
Weight (Dry) ~12 lbs
Flow Rating Up to ~20 GPM (suitable for 1½″ lines)
Filtration Media 5 µm pre-sediment + food-grade polyphosphate
Replacement Media BB-GUARD-FILTER-1.5 (20″, 5 µm pre-filter)
Service Life Replace annually or as needed (do not exceed 1 year)
Operating Pressure Max 75 psi; typical range 30–75 psi
Temperature Range 40 °F to 100 °F (4 °C to 38 °C)

*Performance varies depending on water quality and usage conditions.

Installation & Use Notes

  • Recommended for installation on the cold-water inlet of your water heater—the unit should be upstream of the heater.
  • For well water, additional pre-treatment may be needed—test water quality before installing.
  • Do **not** use with softened water supplies containing sodium or potassium chlorides; such salt may impact media effectiveness.
  • Install in cold-water line only, and observe direction if marked; reversible for compatibility.
  • Replace the filter annually (or sooner in heavy sediment conditions) to maintain performance.

What’s Included

  • Heater Guard 1.5″ unit with pre-loaded media
  • Mounting bracket & hardware
  • Manual and filter replacement instructions