Hydro-Rain - HRB-200-FF-FC - 2" Commercial Valve Female Pipe Thread
HRB COMMERCIAL
The industryās fastest, best built valves. The HRB Series valves are the ones you can install and forgetāthey work flawlessly year after year even under pressures up to 200 PSI. We build them with durable glass-filled nylon and a fabric-reinforced diaphragm to ensure toughness and reliable, long-lasting performance. The diaphragm spring and bonnet studs and screws are made from corrosion-resistant stainless steel, and the flow-control stem is made of solid, heavy-duty brass. The self-flushing grit screen filters out sand and debris, and the slow-closing diaphragm reduces risk of water hammer.
FEATURES AND BENEFITS
- Fiber Reinforced BodyāDelivers superior robustness under extreme conditions.
- Solid Brass and Stainless Steel Internalsā Ensures corrosion resistance.
- Slow-Closing Reinforced DiaphragmāProtects against water hammer.
- Pilot Hole Filter ScreenāReduces risk of clogging.
- Stainless Steel StudsāPrevent possible damage due to over tightening and corrosion.
- Manual Internal BleedāEnables convenient, water-efficient manual operation.
- Manual External BleedāEnables fast seasonal startup and shutdown.
- Low and High FlowāSatisfies a wide range of flow conditions and application requirements.
- Flow Control StemāProvides ability to adjust flow over a wide range.
- One-Piece Solenoid DesignāSecures plunger in solenoid body.
- Model VersatilityāCovers 1", 1Ā½" and 2" applications.
Pressure: 20~200 PSI (1.38~13.80 BAR)
Flow: 0.25~200 GPM (0.06~45,40 m3/h; 0.32~12.60 l/s)
Water Temperature: Up to 150Ā°F (66Ā°C)
Ambient Temperature: Up to 150Ā°F (66Ā°C)
HRB 150 / 200
Ā· Height: 8" (20.3 cm)
Ā· Length: 6" (15.2 cm)
Ā· Width: 6" (15.2 cm)
24 VAC 50/60 (Cycle/Sec) Solenoid
Inrush Current: .30 A (7.2 VA) at 60 HZ
Holding Current: .19A (4.6VA) at 60 HZ
Coil Resistance: 22 OHMS
HRB COMMERCIAL
The industryās fastest, best built valves. The HRB Series valves are the ones you can install and forgetāthey work flawlessly year after year even under pressures up to 200 PSI. We build them with durable glass-filled nylon and a fabric-reinforced diaphragm to ensure toughness and reliable, long-lasting performance. The diaphragm spring and bonnet studs and screws are made from corrosion-resistant stainless steel, and the flow-control stem is made of solid, heavy-duty brass. The self-flushing grit screen filters out sand and debris, and the slow-closing diaphragm reduces risk of water hammer.
FEATURES AND BENEFITS
- Fiber Reinforced BodyāDelivers superior robustness under extreme conditions.
- Solid Brass and Stainless Steel Internalsā Ensures corrosion resistance.
- Slow-Closing Reinforced DiaphragmāProtects against water hammer.
- Pilot Hole Filter ScreenāReduces risk of clogging.
- Stainless Steel StudsāPrevent possible damage due to over tightening and corrosion.
- Manual Internal BleedāEnables convenient, water-efficient manual operation.
- Manual External BleedāEnables fast seasonal startup and shutdown.
- Low and High FlowāSatisfies a wide range of flow conditions and application requirements.
- Flow Control StemāProvides ability to adjust flow over a wide range.
- One-Piece Solenoid DesignāSecures plunger in solenoid body.
- Model VersatilityāCovers 1", 1Ā½" and 2" applications.
Pressure: 20~200 PSI (1.38~13.80 BAR)
Flow: 0.25~200 GPM (0.06~45,40 m3/h; 0.32~12.60 l/s)
Water Temperature: Up to 150Ā°F (66Ā°C)
Ambient Temperature: Up to 150Ā°F (66Ā°C)
HRB 150 / 200
Ā· Height: 8" (20.3 cm)
Ā· Length: 6" (15.2 cm)
Ā· Width: 6" (15.2 cm)
24 VAC 50/60 (Cycle/Sec) Solenoid
Inrush Current: .30 A (7.2 VA) at 60 HZ
Holding Current: .19A (4.6VA) at 60 HZ
Coil Resistance: 22 OHMS
Original: $99.12
-65%$99.12
$34.69Description
HRB COMMERCIAL
The industryās fastest, best built valves. The HRB Series valves are the ones you can install and forgetāthey work flawlessly year after year even under pressures up to 200 PSI. We build them with durable glass-filled nylon and a fabric-reinforced diaphragm to ensure toughness and reliable, long-lasting performance. The diaphragm spring and bonnet studs and screws are made from corrosion-resistant stainless steel, and the flow-control stem is made of solid, heavy-duty brass. The self-flushing grit screen filters out sand and debris, and the slow-closing diaphragm reduces risk of water hammer.
FEATURES AND BENEFITS
- Fiber Reinforced BodyāDelivers superior robustness under extreme conditions.
- Solid Brass and Stainless Steel Internalsā Ensures corrosion resistance.
- Slow-Closing Reinforced DiaphragmāProtects against water hammer.
- Pilot Hole Filter ScreenāReduces risk of clogging.
- Stainless Steel StudsāPrevent possible damage due to over tightening and corrosion.
- Manual Internal BleedāEnables convenient, water-efficient manual operation.
- Manual External BleedāEnables fast seasonal startup and shutdown.
- Low and High FlowāSatisfies a wide range of flow conditions and application requirements.
- Flow Control StemāProvides ability to adjust flow over a wide range.
- One-Piece Solenoid DesignāSecures plunger in solenoid body.
- Model VersatilityāCovers 1", 1Ā½" and 2" applications.
Pressure: 20~200 PSI (1.38~13.80 BAR)
Flow: 0.25~200 GPM (0.06~45,40 m3/h; 0.32~12.60 l/s)
Water Temperature: Up to 150Ā°F (66Ā°C)
Ambient Temperature: Up to 150Ā°F (66Ā°C)
HRB 150 / 200
Ā· Height: 8" (20.3 cm)
Ā· Length: 6" (15.2 cm)
Ā· Width: 6" (15.2 cm)
24 VAC 50/60 (Cycle/Sec) Solenoid
Inrush Current: .30 A (7.2 VA) at 60 HZ
Holding Current: .19A (4.6VA) at 60 HZ
Coil Resistance: 22 OHMS
